arm64: ftrace: fix module PLTs with mcount
In the Linux kernel, the following vulnerability has been resolved:
arm64: ftrace: fix module PLTs with mcount
Li Huafei reports that mcount-based ftrace with module PLTs was broken
by commit:
a6253579977e4c6f ("arm64: ftrace: consistently handle PLTs.")
When a module PLTs are used and a module is loaded sufficiently far away
from the kernel, we'll create PLTs for any branches which are
out-of-range. These are separate from the special ftrace trampoline
PLTs, which the module PLT code doesn't directly manipulate.
When mcount is in use this is a problem, as each mcount callsite in a
module will be initialized to point to a module PLT, but since commit
a6253579977e4c6f ftrace_make_nop() will assume that the callsite has
been initialized to point to the special ftrace trampoline PLT, and
ftrace_find_callable_addr() rejects other cases.
This means that when ftrace tries to initialize a callsite via
ftrace_make_nop(), the call to ftrace_find_callable_addr() will find
that the _mcount stub is out-of-range and is not handled by the ftrace
PLT, resulting in a splat:
| ftrace_test: loading out-of-tree module taints kernel.
| ftrace: no module PLT for _mcount
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffff800029180014>] 0xffff800029180014
| actual: 44:00:00:94
| Initializing ftrace call sites
| ftrace record flags: 2000000
| (0)
| expected tramp: ffff80000802eb3c
| ------------[ cut here ]------------
| WARNING: CPU: 3 PID: 157 at kernel/trace/ftrace.c:2120 ftrace_bug+0x94/0x270
| Modules linked in:
| CPU: 3 PID: 157 Comm: insmod Tainted: G O 6.0.0-rc6-00151-gcd722513a189-dirty #22
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x94/0x270
| lr : ftrace_bug+0x21c/0x270
| sp : ffff80000b2bbaf0
| x29: ffff80000b2bbaf0 x28: 0000000000000000 x27: ffff0000c4d38000
| x26: 0000000000000001 x25: ffff800009d7e000 x24: ffff0000c4d86e00
| x23: 0000000002000000 x22: ffff80000a62b000 x21: ffff8000098ebea8
| x20: ffff0000c4d38000 x19: ffff80000aa24158 x18: ffffffffffffffff
| x17: 0000000000000000 x16: 0a0d2d2d2d2d2d2d x15: ffff800009aa9118
| x14: 0000000000000000 x13: 6333626532303830 x12: 3030303866666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : 3362653230383030
| x8 : c0000000ffffefff x7 : 0000000000017fe8 x6 : 000000000000bff4
| x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000001
| x2 : ad2cb14bb5438900 x1 : 0000000000000000 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x94/0x270
| ftrace_process_locs+0x308/0x430
| ftrace_module_init+0x44/0x60
| load_module+0x15b4/0x1ce8
| __do_sys_init_module+0x1ec/0x238
| __arm64_sys_init_module+0x24/0x30
| invoke_syscall+0x54/0x118
| el0_svc_common.constprop.4+0x84/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x1c/0x50
| el0t_64_sync_handler+0x90/0xb8
| el0t_64_sync+0x15c/0x160
| ---[ end trace 0000000000000000 ]---
| ---------test_init-----------
Fix this by reverting to the old behaviour of ignoring the old
instruction when initialising an mcount callsite in a module, which was
the behaviour prior to commit a6253579977e4c6f.
