In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO The SC16IS7XX IC supports a burst mode to access the FIFOs where the initial register address is sent ($00), followed by all the FIFO data without having to resend the register address each time. In this mode, the IC doesn't increment the register address for each R/W byte. The regmap_raw_read() and regmap_raw_write() are functions which can perform IO over multiple registers. They are currently used to read/write from/to the FIFO, and although they operate correctly in this burst mode on the SPI bus, they would corrupt the regmap cache if it was not disabled manually. The reason is that when the R/W size is more than 1 byte, these functions assume that the register address is incremented and handle the cache accordingly. Convert FIFO R/W functions to use the regmap _noinc_ versions in order to remove the manual cache control which was a workaround when using the _raw_ versions. FIFO registers are properly declared as volatile so cache will not be used/updated for FIFO accesses.
This page covers CVE-2023-52488 as tracked by Ubuntu, for the package linux. The fix is available in version 5.15.0-116.126; earlier versions remain affected.
This issue can be reached with local access to the system, attack complexity is low, an attacker needs low-level privileges on the target. No user interaction is required. The scope is unchanged, so the impact stays within the vulnerable component. Rated impact: confidentiality none, integrity none, availability high.
The score comes from this vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
UBUNTU-CVE-2023-52488 is recorded against 117 packages.
Published on 11 March 2024 and last revised on 17 August 2026. No public exploit is currently recorded for this entry. Record sourced from OSV.
ubuntu.com (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
www.cve.org (Report)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
linux has other advisories on record. If you are patching this one, these are worth checking on the same host:
Each distribution ships its own build and its own fixed version. Pick the one you run:
Details
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Affected Packages
| Software | From version | Fixed in |
|---|---|---|
| linux | — | 5.15.0-116.126 |
| linux-allwinner-5.19 | — | — |
| linux-aws | — | 5.15.0-1065.71 |
| linux-aws-5.0 | — | — |
| linux-aws-5.11 | — | — |
| linux-aws-5.13 | — | — |
| linux-aws-5.15 | — | 5.15.0-1065.71~20.04.1 |
| linux-aws-5.19 | — | — |
| linux-aws-5.3 | — | — |
| linux-aws-5.4 | — | 5.4.0-1136.146~18.04.1 |
| linux-aws-5.8 | — | — |
| linux-aws-6.2 | — | — |
| linux-aws-6.5 | — | — |
| linux-aws-fips | — | 5.15.0-1065.71+fips1 |
| linux-aws-hwe | — | 4.15.0-1178.191~16.04.1 |
| linux-azure | — | 5.15.0-1068.77 |
| linux-azure-4.15 | — | 4.15.0-1186.201 |
| linux-azure-5.11 | — | — |
| linux-azure-5.13 | — | — |
| linux-azure-5.15 | — | 5.15.0-1068.77~20.04.1 |
| linux-azure-5.19 | — | — |
| linux-azure-5.3 | — | — |
| linux-azure-5.4 | — | 5.4.0-1142.149~18.04.1 |
| linux-azure-5.8 | — | — |
| linux-azure-6.2 | — | — |
| linux-azure-6.5 | — | 6.5.0-1022.23~22.04.1 |
| linux-azure-edge | — | — |
| linux-azure-fde | — | — |
| linux-azure-fde-5.19 | — | — |
| linux-azure-fde-6.2 | — | — |
| linux-azure-fde-6.8 | — | — |
| linux-azure-fips | — | 5.15.0-1068.77+fips1 |
| linux-bluefield | — | — |
| linux-fips | — | 5.15.0-115.125+fips1 |
| linux-gcp | — | 5.15.0-1064.72 |
| linux-gcp-4.15 | — | 4.15.0-1171.188 |
| linux-gcp-5.11 | — | — |
| linux-gcp-5.13 | — | — |
| linux-gcp-5.15 | — | 5.15.0-1065.73~20.04.1 |
| linux-gcp-5.19 | — | — |
| linux-gcp-5.3 | — | — |
| linux-gcp-5.4 | — | 5.4.0-1140.149~18.04.1 |
| linux-gcp-5.8 | — | — |
| linux-gcp-6.2 | — | — |
| linux-gcp-6.5 | — | 6.5.0-1022.24~22.04.1 |
| linux-gcp-fips | — | 5.15.0-1064.72+fips1 |
| linux-gke | — | 5.15.0-1062.68 |
| linux-gke-4.15 | — | — |
| linux-gke-5.15 | — | — |
| linux-gke-5.4 | — | — |
| linux-gkeop | — | 5.15.0-1048.55 |
| linux-gkeop-5.15 | — | 5.15.0-1048.55~20.04.1 |
| linux-gkeop-5.4 | — | — |
| linux-hwe | — | — |
| linux-hwe-5.11 | — | — |
| linux-hwe-5.13 | — | — |
| linux-hwe-5.15 | — | 5.15.0-116.126~20.04.1 |
| linux-hwe-5.19 | — | — |
| linux-hwe-5.4 | — | 5.4.0-202.222~18.04.1 |
| linux-hwe-5.8 | — | — |
| linux-hwe-6.2 | — | — |
| linux-hwe-6.5 | — | 6.5.0-41.41~22.04.2 |
| linux-hwe-edge | — | — |
| linux-ibm | — | 5.15.0-1058.61 |
| linux-ibm-5.15 | — | 5.15.0-1058.61~20.04.1 |
| linux-ibm-5.4 | — | 5.4.0-1083.88~18.04.1 |
| linux-intel-5.13 | — | — |
| linux-intel-iot-realtime | — | 5.15.0-1058.60 |
| linux-intel-iotg | — | 5.15.0-1060.66 |
| linux-intel-iotg-5.15 | — | 5.15.0-1060.66~20.04.1 |
| linux-iot | — | 5.4.0-1045.46 |
| linux-kvm | — | 5.15.0-1062.67 |
| linux-lowlatency | — | 5.15.0-116.126 |
| linux-lowlatency-hwe-5.15 | — | 5.15.0-116.126~20.04.1 |
| linux-lowlatency-hwe-5.19 | — | — |
| linux-lowlatency-hwe-6.2 | — | — |
| linux-lowlatency-hwe-6.5 | — | 6.5.0-41.41.1~22.04.1 |
| linux-lts-xenial | — | 4.4.0-266.300~14.04.1 |
| linux-nvidia | — | 5.15.0-1060.61 |
| linux-nvidia-6.2 | — | — |
| linux-nvidia-6.5 | — | 6.5.0-1021.22 |
| linux-nvidia-tegra | — | 5.15.0-1026.26 |
| linux-nvidia-tegra-5.15 | — | 5.15.0-1027.27~20.04.1 |
| linux-nvidia-tegra-igx | — | 5.15.0-1015.15 |
| linux-oem | — | — |
| linux-oem-5.10 | — | — |
| linux-oem-5.13 | — | — |
| linux-oem-5.14 | — | — |
| linux-oem-5.17 | — | — |
| linux-oem-5.6 | — | — |
| linux-oem-6.0 | — | — |
| linux-oem-6.1 | — | — |
| linux-oem-6.5 | — | 6.5.0-1024.25 |
| linux-oracle | — | 5.15.0-1063.69 |
| linux-oracle-5.0 | — | — |
| linux-oracle-5.11 | — | — |
| linux-oracle-5.13 | — | — |
| linux-oracle-5.15 | — | 5.15.0-1063.69~20.04.1 |
| linux-oracle-5.3 | — | — |
| linux-oracle-5.4 | — | 5.4.0-1135.144~18.04.1 |
| linux-oracle-5.8 | — | — |
| linux-oracle-6.5 | — | 6.5.0-1024.24~22.04.1 |
| linux-raspi | — | 5.15.0-1058.61 |
| linux-raspi-5.4 | — | 5.4.0-1120.132~18.04.1 |
| linux-raspi-realtime | — | 6.8.0-2001.1 |
| linux-raspi2 | — | — |
| linux-realtime | — | 5.15.0-1066.74 |
| linux-riscv | — | — |
| linux-riscv-5.11 | — | — |
| linux-riscv-5.15 | — | 5.15.0-1061.65~20.04.1 |
| linux-riscv-5.19 | — | — |
| linux-riscv-5.8 | — | — |
| linux-riscv-6.5 | — | 6.5.0-40.40.1~22.04.1 |
| linux-starfive-5.19 | — | — |
| linux-starfive-6.2 | — | — |
| linux-starfive-6.5 | — | 6.5.0-1015.16~22.04.1 |
| linux-xilinx-zynqmp | — | 5.15.0-1035.39 |
References
Similar Threats
Vulnerability Monitoring
UBUNTU-CVE-2023-52488 is rated CVSS 5.5 Medium. BotEraser monitors your WordPress installation and notifies you when software you use appears in our vulnerability database.
Set Up Free Alerts →No credit card required · Results in minutes
ⓘ Data Notice: The information presented above has been compiled from publicly available internet sources. Boteraser aggregates this data solely for informational purposes and does not independently classify, evaluate, or endorse any findings about the vulnerabilities listed. The accuracy and completeness of this information is the sole responsibility of the original publishers. Boteraser and its operators accept no liability for any decisions made based on this data.
Stay up to date with the latest from Boteraser.
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
CloudFlare provides web performance and security solutions, enhancing site speed and protecting against threats.
Service URL: developers.cloudflare.com (opens in a new window)
These cookies are needed for adding comments on this website.
These cookies are used for managing login functionality on this website.
Statistics cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics is a powerful tool that tracks and analyzes website traffic for informed marketing decisions.
Service URL: policies.google.com (opens in a new window)
You can find more information in our Cookie Policy and Privacy Policy.