In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: sdio: Honor the host max_req_size in the RX path Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth combo card. The error he observed is identical to what has been fixed in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem. Lukas found that disabling or limiting RX aggregation works around the problem for some time (but does not fully fix it). In the following discussion a few key topics have been discussed which have an impact on this problem: - The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller which prevents DMA transfers. Instead all transfers need to go through the controller SRAM which limits transfers to 1536 bytes - rtw88 chips don't split incoming (RX) packets, so if a big packet is received this is forwarded to the host in it's original form - rtw88 chips can do RX aggregation, meaning more multiple incoming packets can be pulled by the host from the card with one MMC/SDIO transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation and BIT_EN_PRE_CALC makes the chip honor the limits more effectively) Use multiple consecutive reads in rtw_sdio_read_port() and limit the number of bytes which are copied by the host from the card in one MMC/SDIO transfer. This allows receiving a buffer that's larger than the hosts max_req_size (number of bytes which can be transferred in one MMC/SDIO transfer). As a result of this the skb_over_panic error is gone as the rtw88 driver is now able to receive more than 1536 bytes from the card (either because the incoming packet is larger than that or because multiple packets have been aggregated). In case of an receive errors (-EILSEQ has been observed by Lukas) we need to drain the remaining data from the card's buffer, otherwise the card will return corrupt data for the next rtw_sdio_read_port() call.
This page covers CVE-2023-52611 as tracked by Ubuntu, for the package linux-allwinner-5.19. The fix is available in version 6.5.0-1022.23~22.04.1; earlier versions remain affected.
This issue can be reached with local access to the system, attack complexity is low, an attacker needs low-level privileges on the target. No user interaction is required. The scope is unchanged, so the impact stays within the vulnerable component. Rated impact: confidentiality none, integrity none, availability high.
The score comes from this vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
UBUNTU-CVE-2023-52611 is recorded against 75 packages.
Published on 18 March 2024 and last revised on 6 February 2026. No public exploit is currently recorded for this entry. Record sourced from OSV.
ubuntu.com (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
www.cve.org (Report)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
linux-allwinner-5.19 has other advisories on record. If you are patching this one, these are worth checking on the same host:
Each distribution ships its own build and its own fixed version. Pick the one you run:
Details
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Affected Packages
| Software | From version | Fixed in |
|---|---|---|
| linux-allwinner-5.19 | — | — |
| linux-aws-5.0 | — | — |
| linux-aws-5.11 | — | — |
| linux-aws-5.13 | — | — |
| linux-aws-5.19 | — | — |
| linux-aws-5.3 | — | — |
| linux-aws-5.8 | — | — |
| linux-aws-6.2 | — | — |
| linux-aws-6.5 | — | — |
| linux-azure | — | — |
| linux-azure-5.11 | — | — |
| linux-azure-5.13 | — | — |
| linux-azure-5.19 | — | — |
| linux-azure-5.3 | — | — |
| linux-azure-5.8 | — | — |
| linux-azure-6.2 | — | — |
| linux-azure-6.5 | — | 6.5.0-1022.23~22.04.1 |
| linux-azure-edge | — | — |
| linux-azure-fde | — | — |
| linux-azure-fde-5.19 | — | — |
| linux-azure-fde-6.2 | — | — |
| linux-gcp | — | — |
| linux-gcp-5.11 | — | — |
| linux-gcp-5.13 | — | — |
| linux-gcp-5.19 | — | — |
| linux-gcp-5.3 | — | — |
| linux-gcp-5.8 | — | — |
| linux-gcp-6.2 | — | — |
| linux-gcp-6.5 | — | 6.5.0-1022.24~22.04.1 |
| linux-gke | — | — |
| linux-gke-4.15 | — | — |
| linux-gke-5.15 | — | — |
| linux-gke-5.4 | — | — |
| linux-gkeop-5.4 | — | — |
| linux-hwe | — | — |
| linux-hwe-5.11 | — | — |
| linux-hwe-5.13 | — | — |
| linux-hwe-5.19 | — | — |
| linux-hwe-5.8 | — | — |
| linux-hwe-6.2 | — | — |
| linux-hwe-6.5 | — | 6.5.0-41.41~22.04.2 |
| linux-hwe-edge | — | — |
| linux-intel-5.13 | — | — |
| linux-intel-iot-realtime | — | — |
| linux-lowlatency-hwe-5.19 | — | — |
| linux-lowlatency-hwe-6.2 | — | — |
| linux-lowlatency-hwe-6.5 | — | 6.5.0-41.41.1~22.04.1 |
| linux-nvidia-6.2 | — | — |
| linux-nvidia-6.5 | — | 6.5.0-1021.22 |
| linux-oem | — | — |
| linux-oem-5.10 | — | — |
| linux-oem-5.13 | — | — |
| linux-oem-5.14 | — | — |
| linux-oem-5.17 | — | — |
| linux-oem-5.6 | — | — |
| linux-oem-6.0 | — | — |
| linux-oem-6.1 | — | — |
| linux-oem-6.5 | — | 6.5.0-1024.25 |
| linux-oracle-5.0 | — | — |
| linux-oracle-5.11 | — | — |
| linux-oracle-5.13 | — | — |
| linux-oracle-5.3 | — | — |
| linux-oracle-5.8 | — | — |
| linux-oracle-6.5 | — | 6.5.0-1024.24~22.04.1 |
| linux-raspi-realtime | — | 6.8.0-2001.1 |
| linux-raspi2 | — | — |
| linux-realtime | — | — |
| linux-riscv | — | — |
| linux-riscv-5.11 | — | — |
| linux-riscv-5.19 | — | — |
| linux-riscv-5.8 | — | — |
| linux-riscv-6.5 | — | 6.5.0-40.40.1~22.04.1 |
| linux-starfive-5.19 | — | — |
| linux-starfive-6.2 | — | — |
| linux-starfive-6.5 | — | 6.5.0-1015.16~22.04.1 |
References
Similar Threats
Vulnerability Monitoring
UBUNTU-CVE-2023-52611 is rated CVSS 5.5 Medium. BotEraser monitors your WordPress installation and notifies you when software you use appears in our vulnerability database.
Set Up Free Alerts →No credit card required · Results in minutes
ⓘ Data Notice: The information presented above has been compiled from publicly available internet sources. Boteraser aggregates this data solely for informational purposes and does not independently classify, evaluate, or endorse any findings about the vulnerabilities listed. The accuracy and completeness of this information is the sole responsibility of the original publishers. Boteraser and its operators accept no liability for any decisions made based on this data.
Stay up to date with the latest from Boteraser.
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
CloudFlare provides web performance and security solutions, enhancing site speed and protecting against threats.
Service URL: developers.cloudflare.com (opens in a new window)
These cookies are needed for adding comments on this website.
These cookies are used for managing login functionality on this website.
Statistics cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics is a powerful tool that tracks and analyzes website traffic for informed marketing decisions.
Service URL: policies.google.com (opens in a new window)
You can find more information in our Cookie Policy and Privacy Policy.