In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.
This page covers CVE-2024-43900 as tracked by Ubuntu, for the package linux. The fix is available in version 6.8.0-50.51; earlier versions remain affected.
This issue can be reached with local access to the system, attack complexity is low, an attacker needs low-level privileges on the target. No user interaction is required. The scope is unchanged, so the impact stays within the vulnerable component. Rated impact: confidentiality high, integrity high, availability high.
The score comes from this vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
UBUNTU-CVE-2024-43900 is recorded against 129 packages.
Published on 26 August 2024 and last revised on 17 August 2026. No public exploit is currently recorded for this entry. Record sourced from OSV.
ubuntu.com (Report)
www.cve.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
linux has other advisories on record. If you are patching this one, these are worth checking on the same host:
Each distribution ships its own build and its own fixed version. Pick the one you run:
Details
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Affected Packages
| Software | From version | Fixed in |
|---|---|---|
| linux | — | 6.8.0-50.51 |
| linux-allwinner-5.19 | — | — |
| linux-aws | — | 6.8.0-1020.22 |
| linux-aws-5.0 | — | — |
| linux-aws-5.11 | — | — |
| linux-aws-5.13 | — | — |
| linux-aws-5.15 | — | 5.15.0-1080.87~20.04.1 |
| linux-aws-5.19 | — | — |
| linux-aws-5.3 | — | — |
| linux-aws-5.4 | — | 5.4.0-1142.152~18.04.1 |
| linux-aws-5.8 | — | — |
| linux-aws-6.2 | — | — |
| linux-aws-6.5 | — | — |
| linux-aws-6.8 | — | 6.8.0-1020.22~22.04.1 |
| linux-aws-fips | — | 5.15.0-1080.87+fips1 |
| linux-aws-hwe | — | 4.15.0-1178.191~16.04.1 |
| linux-azure | — | 6.8.0-1020.23 |
| linux-azure-4.15 | — | 4.15.0-1186.201 |
| linux-azure-5.11 | — | — |
| linux-azure-5.13 | — | — |
| linux-azure-5.15 | — | 5.15.0-1086.95~20.04.1 |
| linux-azure-5.19 | — | — |
| linux-azure-5.3 | — | — |
| linux-azure-5.4 | — | 5.4.0-1147.154~18.04.1 |
| linux-azure-5.8 | — | — |
| linux-azure-6.2 | — | — |
| linux-azure-6.5 | — | — |
| linux-azure-6.8 | — | 6.8.0-1020.23~22.04.1 |
| linux-azure-edge | — | — |
| linux-azure-fde | — | — |
| linux-azure-fde-5.19 | — | — |
| linux-azure-fde-6.2 | — | — |
| linux-azure-fips | — | 5.15.0-1083.92+fips1 |
| linux-bluefield | — | — |
| linux-fips | — | 6.8.0-78.78+fips1 |
| linux-gcp | — | 6.8.0-1019.21 |
| linux-gcp-4.15 | — | 4.15.0-1171.188 |
| linux-gcp-5.11 | — | — |
| linux-gcp-5.13 | — | — |
| linux-gcp-5.15 | — | 5.15.0-1081.90~20.04.1 |
| linux-gcp-5.19 | — | — |
| linux-gcp-5.3 | — | — |
| linux-gcp-5.4 | — | 5.4.0-1145.154~18.04.1 |
| linux-gcp-5.8 | — | — |
| linux-gcp-6.2 | — | — |
| linux-gcp-6.5 | — | — |
| linux-gcp-6.8 | — | 6.8.0-1019.21~22.04.1 |
| linux-gcp-fips | — | 5.15.0-1079.88+fips1 |
| linux-gke | — | 6.8.0-1015.19 |
| linux-gke-4.15 | — | — |
| linux-gke-5.15 | — | — |
| linux-gke-5.4 | — | — |
| linux-gkeop | — | 6.8.0-1002.4 |
| linux-gkeop-5.15 | — | — |
| linux-gkeop-5.4 | — | — |
| linux-hwe | — | — |
| linux-hwe-5.11 | — | — |
| linux-hwe-5.13 | — | — |
| linux-hwe-5.15 | — | 5.15.0-136.147~20.04.1 |
| linux-hwe-5.19 | — | — |
| linux-hwe-5.4 | — | 5.4.0-211.231~18.04.1 |
| linux-hwe-5.8 | — | — |
| linux-hwe-6.2 | — | — |
| linux-hwe-6.5 | — | — |
| linux-hwe-6.8 | — | 6.8.0-50.51~22.04.1 |
| linux-hwe-edge | — | — |
| linux-ibm | — | 6.8.0-1017.17 |
| linux-ibm-5.15 | — | 5.15.0-1074.77~20.04.1 |
| linux-ibm-5.4 | — | 5.4.0-1090.95~18.04.1 |
| linux-ibm-6.8 | — | 6.8.0-1017.17~22.04.1 |
| linux-intel-5.13 | — | — |
| linux-intel-iot-realtime | — | 5.15.0-1073.75 |
| linux-intel-iotg | — | 5.15.0-1075.81 |
| linux-intel-iotg-5.15 | — | 5.15.0-1077.83~20.04.1 |
| linux-iot | — | 5.4.0-1048.51 |
| linux-kvm | — | 5.15.0-1076.81 |
| linux-lowlatency | — | 6.8.0-50.51.1 |
| linux-lowlatency-hwe-5.15 | — | 5.15.0-135.146~20.04.1 |
| linux-lowlatency-hwe-5.19 | — | — |
| linux-lowlatency-hwe-6.2 | — | — |
| linux-lowlatency-hwe-6.5 | — | — |
| linux-lowlatency-hwe-6.8 | — | 6.8.0-50.51.1~22.04.1 |
| linux-lts-xenial | — | 4.4.0-266.300~14.04.1 |
| linux-nvidia | — | 6.8.0-1019.21 |
| linux-nvidia-6.2 | — | — |
| linux-nvidia-6.5 | — | — |
| linux-nvidia-6.8 | — | 6.8.0-1019.21~22.04.1 |
| linux-nvidia-lowlatency | — | 6.8.0-1019.21.1 |
| linux-nvidia-tegra | — | 5.15.0-1033.33 |
| linux-nvidia-tegra-5.15 | — | 5.15.0-1039.39~20.04.1 |
| linux-nvidia-tegra-igx | — | 5.15.0-1021.21 |
| linux-oem | — | — |
| linux-oem-5.10 | — | — |
| linux-oem-5.13 | — | — |
| linux-oem-5.14 | — | — |
| linux-oem-5.17 | — | — |
| linux-oem-5.6 | — | — |
| linux-oem-6.0 | — | — |
| linux-oem-6.1 | — | — |
| linux-oem-6.5 | — | — |
| linux-oem-6.8 | — | 6.8.0-1018.18 |
| linux-oracle | — | 6.8.0-1017.18 |
| linux-oracle-5.0 | — | — |
| linux-oracle-5.11 | — | — |
| linux-oracle-5.13 | — | — |
| linux-oracle-5.15 | — | 5.15.0-1077.83~20.04.1 |
| linux-oracle-5.3 | — | — |
| linux-oracle-5.4 | — | 5.4.0-1140.149~18.04.1 |
| linux-oracle-5.8 | — | — |
| linux-oracle-6.5 | — | — |
| linux-oracle-6.8 | — | 6.8.0-1017.18~22.04.1 |
| linux-raspi | — | 6.8.0-1016.18 |
| linux-raspi-5.4 | — | 5.4.0-1129.142~18.04.1 |
| linux-raspi-realtime | — | 6.8.0-2015.16 |
| linux-raspi2 | — | — |
| linux-realtime | — | 6.8.1-1013.14 |
| linux-realtime-6.8 | — | 6.8.1-1013.14~22.04.1 |
| linux-riscv | — | 6.8.0-50.51.1 |
| linux-riscv-5.11 | — | — |
| linux-riscv-5.15 | — | 5.15.0-1075.79~20.04.1 |
| linux-riscv-5.19 | — | — |
| linux-riscv-5.8 | — | — |
| linux-riscv-6.5 | — | — |
| linux-riscv-6.8 | — | 6.8.0-50.51.1~22.04.1 |
| linux-starfive-5.19 | — | — |
| linux-starfive-6.2 | — | — |
| linux-starfive-6.5 | — | — |
| linux-xilinx | — | 6.8.0-1017.18 |
| linux-xilinx-zynqmp | — | 5.15.0-1044.48 |
References
Similar Threats
Site Security Check
UBUNTU-CVE-2024-43900 is rated CVSS 7.8 High. BotEraser scans your installation against known CVE records and tells you whether this vulnerability applies to the versions you actually run.
Scan My Site Free →No credit card required · Results in minutes
ⓘ Data Notice: The information presented above has been compiled from publicly available internet sources. Boteraser aggregates this data solely for informational purposes and does not independently classify, evaluate, or endorse any findings about the vulnerabilities listed. The accuracy and completeness of this information is the sole responsibility of the original publishers. Boteraser and its operators accept no liability for any decisions made based on this data.
Stay up to date with the latest from Boteraser.
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
CloudFlare provides web performance and security solutions, enhancing site speed and protecting against threats.
Service URL: developers.cloudflare.com (opens in a new window)
These cookies are needed for adding comments on this website.
These cookies are used for managing login functionality on this website.
Statistics cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics is a powerful tool that tracks and analyzes website traffic for informed marketing decisions.
Service URL: policies.google.com (opens in a new window)
You can find more information in our Cookie Policy and Privacy Policy.