In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully.
This page covers CVE-2024-49927 as tracked by Ubuntu, for the package linux. The fix is available in version 6.8.0-54.56; earlier versions remain affected.
This issue can be reached with local access to the system, attack complexity is low, an attacker needs low-level privileges on the target. No user interaction is required. The scope is unchanged, so the impact stays within the vulnerable component. Rated impact: confidentiality none, integrity none, availability high.
The score comes from this vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
UBUNTU-CVE-2024-49927 is recorded against 134 packages.
Published on 21 October 2024 and last revised on 17 August 2026. No public exploit is currently recorded for this entry. Record sourced from OSV.
ubuntu.com (Report)
www.cve.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
git.kernel.org (Report)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
ubuntu.com (Advisory)
linux has other advisories on record. If you are patching this one, these are worth checking on the same host:
Each distribution ships its own build and its own fixed version. Pick the one you run:
Details
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Affected Packages
| Software | From version | Fixed in |
|---|---|---|
| linux | — | 6.8.0-54.56 |
| linux-allwinner-5.19 | — | — |
| linux-aws | — | 6.8.0-1023.25 |
| linux-aws-5.0 | — | — |
| linux-aws-5.11 | — | — |
| linux-aws-5.13 | — | — |
| linux-aws-5.15 | — | 5.15.0-1073.79~20.04.1 |
| linux-aws-5.19 | — | — |
| linux-aws-5.3 | — | — |
| linux-aws-5.4 | — | 5.4.0-1156.166~18.04.1 |
| linux-aws-5.8 | — | — |
| linux-aws-6.2 | — | — |
| linux-aws-6.5 | — | — |
| linux-aws-6.8 | — | 6.8.0-1023.25~22.04.1 |
| linux-aws-fips | — | 5.15.0-1073.79+fips1 |
| linux-aws-hwe | — | 4.15.0-1189.202~16.04.1 |
| linux-azure | — | 6.8.0-1025.30 |
| linux-azure-4.15 | — | 4.15.0-1197.212 |
| linux-azure-5.11 | — | — |
| linux-azure-5.13 | — | — |
| linux-azure-5.15 | — | 5.15.0-1078.87~20.04.1 |
| linux-azure-5.19 | — | — |
| linux-azure-5.3 | — | — |
| linux-azure-5.4 | — | 5.4.0-1161.167~18.04.1 |
| linux-azure-5.8 | — | — |
| linux-azure-6.11 | — | 6.11.0-1012.12~24.04.1 |
| linux-azure-6.2 | — | — |
| linux-azure-6.5 | — | — |
| linux-azure-6.8 | — | 6.8.0-1025.30~22.04.1 |
| linux-azure-edge | — | — |
| linux-azure-fde | — | — |
| linux-azure-fde-5.19 | — | — |
| linux-azure-fde-6.2 | — | — |
| linux-azure-fips | — | 5.15.0-1078.87+fips1 |
| linux-azure-nvidia | — | 6.8.0-1014.15 |
| linux-bluefield | — | — |
| linux-fips | — | 6.8.0-78.78+fips1 |
| linux-gcp | — | 6.8.0-1024.26 |
| linux-gcp-4.15 | — | 4.15.0-1182.199 |
| linux-gcp-5.11 | — | — |
| linux-gcp-5.13 | — | — |
| linux-gcp-5.15 | — | 5.15.0-1072.80~20.04.1 |
| linux-gcp-5.19 | — | — |
| linux-gcp-5.3 | — | — |
| linux-gcp-5.4 | — | 5.4.0-1159.168~18.04.1 |
| linux-gcp-5.8 | — | — |
| linux-gcp-6.11 | — | 6.11.0-1011.11~24.04.1 |
| linux-gcp-6.2 | — | — |
| linux-gcp-6.5 | — | — |
| linux-gcp-6.8 | — | 6.8.0-1024.26~22.04.1 |
| linux-gcp-fips | — | 5.15.0-1072.80+fips1 |
| linux-gke | — | 6.8.0-1019.23 |
| linux-gke-4.15 | — | — |
| linux-gke-5.15 | — | — |
| linux-gke-5.4 | — | — |
| linux-gkeop | — | 6.8.0-1006.8 |
| linux-gkeop-5.15 | — | — |
| linux-gkeop-5.4 | — | — |
| linux-hwe | — | — |
| linux-hwe-5.11 | — | — |
| linux-hwe-5.13 | — | — |
| linux-hwe-5.15 | — | 5.15.0-127.137~20.04.1 |
| linux-hwe-5.19 | — | — |
| linux-hwe-5.4 | — | 5.4.0-227.247~18.04.1 |
| linux-hwe-5.8 | — | — |
| linux-hwe-6.2 | — | — |
| linux-hwe-6.5 | — | — |
| linux-hwe-6.8 | — | 6.8.0-57.59~22.04.1 |
| linux-hwe-edge | — | — |
| linux-ibm | — | 6.8.0-1022.22 |
| linux-ibm-5.15 | — | 5.15.0-1066.69~20.04.1 |
| linux-ibm-5.4 | — | 5.4.0-1102.107~18.04.1 |
| linux-ibm-6.8 | — | 6.8.0-1023.23~22.04.1 |
| linux-intel-5.13 | — | — |
| linux-intel-iot-realtime | — | 5.15.0-1066.68 |
| linux-intel-iotg | — | 5.15.0-1071.77 |
| linux-intel-iotg-5.15 | — | 5.15.0-1071.77~20.04.1 |
| linux-iot | — | 5.4.0-1060.63 |
| linux-kvm | — | 5.15.0-1070.75 |
| linux-lowlatency | — | 6.8.0-54.56.1 |
| linux-lowlatency-hwe-5.15 | — | 5.15.0-127.137~20.04.1 |
| linux-lowlatency-hwe-5.19 | — | — |
| linux-lowlatency-hwe-6.2 | — | — |
| linux-lowlatency-hwe-6.5 | — | — |
| linux-lowlatency-hwe-6.8 | — | 6.8.0-54.56.1~22.04.1 |
| linux-lts-xenial | — | 4.4.0-278.312~14.04.1 |
| linux-nvidia | — | 6.8.0-1022.25 |
| linux-nvidia-6.11 | — | 6.11.0-1007.7 |
| linux-nvidia-6.2 | — | — |
| linux-nvidia-6.5 | — | — |
| linux-nvidia-6.8 | — | 6.8.0-1022.25~22.04.2 |
| linux-nvidia-lowlatency | — | 6.8.0-1022.25.2 |
| linux-nvidia-tegra | — | 5.15.0-1032.32 |
| linux-nvidia-tegra-5.15 | — | 5.15.0-1032.32~20.04.1 |
| linux-nvidia-tegra-igx | — | 5.15.0-1020.20 |
| linux-oem | — | — |
| linux-oem-5.10 | — | — |
| linux-oem-5.13 | — | — |
| linux-oem-5.14 | — | — |
| linux-oem-5.17 | — | — |
| linux-oem-5.6 | — | — |
| linux-oem-6.0 | — | — |
| linux-oem-6.1 | — | — |
| linux-oem-6.11 | — | 6.11.0-1015.15 |
| linux-oem-6.5 | — | — |
| linux-oem-6.8 | — | 6.8.0-1024.24 |
| linux-oracle | — | 6.8.0-1020.21 |
| linux-oracle-5.0 | — | — |
| linux-oracle-5.11 | — | — |
| linux-oracle-5.13 | — | — |
| linux-oracle-5.15 | — | 5.15.0-1071.77~20.04.1 |
| linux-oracle-5.3 | — | — |
| linux-oracle-5.4 | — | 5.4.0-1154.164~18.04.1 |
| linux-oracle-5.8 | — | — |
| linux-oracle-6.5 | — | — |
| linux-oracle-6.8 | — | 6.8.0-1020.21~22.04.1 |
| linux-raspi | — | 6.8.0-1019.23 |
| linux-raspi-5.4 | — | 5.4.0-1139.152~18.04.1 |
| linux-raspi-realtime | — | 6.8.0-2018.19 |
| linux-raspi2 | — | — |
| linux-realtime | — | 6.8.1-1016.17 |
| linux-realtime-6.8 | — | 6.8.1-1016.17~22.04.1 |
| linux-riscv | — | 6.8.0-53.55.1 |
| linux-riscv-5.11 | — | — |
| linux-riscv-5.15 | — | 5.15.0-1069.73~20.04.1 |
| linux-riscv-5.19 | — | — |
| linux-riscv-5.8 | — | — |
| linux-riscv-6.5 | — | — |
| linux-riscv-6.8 | — | 6.8.0-53.55.1~22.04.1 |
| linux-starfive-5.19 | — | — |
| linux-starfive-6.2 | — | — |
| linux-starfive-6.5 | — | — |
| linux-xilinx | — | 6.8.0-1017.18 |
| linux-xilinx-zynqmp | — | 5.15.0-1039.43 |
References
Similar Threats
Vulnerability Monitoring
UBUNTU-CVE-2024-49927 is rated CVSS 5.5 Medium. BotEraser monitors your WordPress installation and notifies you when software you use appears in our vulnerability database.
Set Up Free Alerts →No credit card required · Results in minutes
ⓘ Data Notice: The information presented above has been compiled from publicly available internet sources. Boteraser aggregates this data solely for informational purposes and does not independently classify, evaluate, or endorse any findings about the vulnerabilities listed. The accuracy and completeness of this information is the sole responsibility of the original publishers. Boteraser and its operators accept no liability for any decisions made based on this data.
Stay up to date with the latest from Boteraser.
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
CloudFlare provides web performance and security solutions, enhancing site speed and protecting against threats.
Service URL: developers.cloudflare.com (opens in a new window)
These cookies are needed for adding comments on this website.
These cookies are used for managing login functionality on this website.
Statistics cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics is a powerful tool that tracks and analyzes website traffic for informed marketing decisions.
Service URL: policies.google.com (opens in a new window)
You can find more information in our Cookie Policy and Privacy Policy.