Description
In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the mcba_usb driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket using the ETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL)) to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, }; The CAN drivers' xmit() function are calling can_dev_dropped_skb() to check that the skb is valid, unfortunately under above conditions, the malicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length. And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not able to correctly handle and will thus misinterpret it as a CAN frame. This can result in a buffer overflow. The driver will consume cf->len as-is with no further checks on these lines: usb_msg.dlc = cf->len; memcpy(usb_msg.data, cf->data, usb_msg.dlc); Here, cf->len corresponds to the flags field of the CAN XL frame. In our previous example, we set canxl_frame->flags to 0xff. Because the maximum expected length is 8, a buffer overflow of 247 bytes occurs! Populate net_device_ops->ndo_change_mtu() to ensure that the interface's MTU can not be set to anything bigger than CAN_MTU. By fixing the root cause, this prevents the buffer overflow.
Details
Affected Packages
| Software | From version | Fixed in |
|---|---|---|
| linux | — | 6.17.0-6.6 |
| linux-allwinner-5.19 | — | — |
| linux-aws | — | 6.17.0-1003.3 |
| linux-aws-5.0 | — | — |
| linux-aws-5.11 | — | — |
| linux-aws-5.13 | — | — |
| linux-aws-5.15 | — | 5.15.0-1100.107~20.04.2 |
| linux-aws-5.19 | — | — |
| linux-aws-5.3 | — | — |
| linux-aws-5.4 | — | — |
| linux-aws-5.8 | — | — |
| linux-aws-6.14 | — | — |
| linux-aws-6.2 | — | — |
| linux-aws-6.5 | — | — |
| linux-aws-6.8 | — | 6.8.0-1050.53~22.04.1 |
| linux-aws-fips | — | 6.8.0-1050.53+fips1 |
| linux-aws-hwe | — | — |
| linux-azure | — | 6.17.0-1006.6 |
| linux-azure-4.15 | — | — |
| linux-azure-5.11 | — | — |
| linux-azure-5.13 | — | — |
| linux-azure-5.15 | — | 5.15.0-1110.119~20.04.1 |
| linux-azure-5.19 | — | — |
| linux-azure-5.3 | — | — |
| linux-azure-5.4 | — | — |
| linux-azure-5.8 | — | — |
| linux-azure-6.11 | — | — |
| linux-azure-6.14 | — | — |
| linux-azure-6.2 | — | — |
| linux-azure-6.5 | — | — |
| linux-azure-6.8 | — | 6.8.0-1051.57~22.04.1 |
| linux-azure-edge | — | — |
| linux-azure-fde | — | — |
| linux-azure-fde-5.19 | — | — |
| linux-azure-fde-6.14 | — | — |
| linux-azure-fde-6.17 | — | — |
| linux-azure-fde-6.2 | — | — |
| linux-azure-fde-6.8 | — | — |
| linux-azure-fips | — | 6.8.0-1052.58+fips1 |
| linux-azure-nvidia | — | — |
| linux-azure-nvidia-6.14 | — | — |
| linux-bluefield | — | — |
| linux-fips | — | 6.8.0-106.106+fips1 |
| linux-gcp | — | 6.17.0-1003.3 |
| linux-gcp-4.15 | — | — |
| linux-gcp-5.11 | — | — |
| linux-gcp-5.13 | — | — |
| linux-gcp-5.15 | — | 5.15.0-1100.109~20.04.1 |
| linux-gcp-5.19 | — | — |
| linux-gcp-5.3 | — | — |
| linux-gcp-5.4 | — | — |
| linux-gcp-5.8 | — | — |
| linux-gcp-6.11 | — | — |
| linux-gcp-6.14 | — | — |
| linux-gcp-6.2 | — | — |
| linux-gcp-6.5 | — | — |
| linux-gcp-6.8 | — | 6.8.0-1052.55~22.04.1 |
| linux-gcp-fips | — | 6.8.0-1052.55+fips1 |
| linux-gke | — | 6.8.0-1048.53 |
| linux-gke-4.15 | — | — |
| linux-gke-5.15 | — | — |
| linux-gke-5.4 | — | — |
| linux-gkeop | — | 6.8.0-1035.38 |
| linux-gkeop-5.15 | — | — |
| linux-gkeop-5.4 | — | — |
| linux-hwe | — | — |
| linux-hwe-5.11 | — | — |
| linux-hwe-5.13 | — | — |
| linux-hwe-5.15 | — | 5.15.0-170.180~20.04.3 |
| linux-hwe-5.19 | — | — |
| linux-hwe-5.4 | — | — |
| linux-hwe-5.8 | — | — |
| linux-hwe-6.11 | — | — |
| linux-hwe-6.14 | — | — |
| linux-hwe-6.2 | — | — |
| linux-hwe-6.5 | — | — |
| linux-hwe-6.8 | — | 6.8.0-106.106~22.04.1 |
| linux-hwe-edge | — | — |
| linux-ibm | — | 6.8.0-1049.49 |
| linux-ibm-5.15 | — | 5.15.0-1094.97~20.04.1 |
| linux-ibm-5.4 | — | — |
| linux-ibm-6.8 | — | 6.8.0-1049.49~22.04.1 |
| linux-intel-5.13 | — | — |
| linux-intel-iot-realtime | — | 5.15.0-1092.94 |
| linux-intel-iotg | — | 5.15.0-1095.101 |
| linux-intel-iotg-5.15 | — | 5.15.0-1095.101~20.04.1 |
| linux-iot | — | — |
| linux-kvm | — | 5.15.0-1092.97 |
| linux-lowlatency | — | 6.8.0-106.106.1 |
| linux-lowlatency-hwe-5.15 | — | 5.15.0-170.180~20.04.1 |
| linux-lowlatency-hwe-5.19 | — | — |
| linux-lowlatency-hwe-6.11 | — | — |
| linux-lowlatency-hwe-6.2 | — | — |
| linux-lowlatency-hwe-6.5 | — | — |
| linux-lowlatency-hwe-6.8 | — | 6.8.0-106.106.1~22.04.1 |
| linux-nvidia | — | 6.8.0-1049.52 |
| linux-nvidia-6.11 | — | — |
| linux-nvidia-6.2 | — | — |
| linux-nvidia-6.5 | — | — |
| linux-nvidia-6.8 | — | 6.8.0-1049.52~22.04.1 |
| linux-nvidia-lowlatency | — | 6.8.0-1049.52.1 |
| linux-nvidia-tegra | — | 6.8.0-1020.20 |
| linux-nvidia-tegra-5.15 | — | 5.15.0-1052.52~20.04.2 |
| linux-nvidia-tegra-igx | — | 5.15.0-1041.41 |
| linux-oem | — | — |
| linux-oem-5.10 | — | — |
| linux-oem-5.13 | — | — |
| linux-oem-5.14 | — | — |
| linux-oem-5.17 | — | — |
| linux-oem-5.6 | — | — |
| linux-oem-6.0 | — | — |
| linux-oem-6.1 | — | — |
| linux-oem-6.11 | — | — |
| linux-oem-6.14 | — | — |
| linux-oem-6.5 | — | — |
| linux-oem-6.8 | — | — |
| linux-oracle | — | 6.17.0-1003.3 |
| linux-oracle-5.0 | — | — |
| linux-oracle-5.11 | — | — |
| linux-oracle-5.13 | — | — |
| linux-oracle-5.15 | — | 5.15.0-1097.103~20.04.1 |
| linux-oracle-5.3 | — | — |
| linux-oracle-5.4 | — | — |
| linux-oracle-5.8 | — | — |
| linux-oracle-6.14 | — | — |
| linux-oracle-6.5 | — | — |
| linux-oracle-6.8 | — | 6.8.0-1047.48~22.04.1 |
| linux-raspi | — | 6.17.0-1004.4 |
| linux-raspi-5.4 | — | — |
| linux-raspi-realtime | — | 6.8.0-2040.41 |
| linux-raspi2 | — | — |
| linux-realtime | — | 6.17.0-1002.3 |
| linux-realtime-6.14 | — | — |
| linux-realtime-6.8 | — | 6.8.1-1045.46~22.04.1 |
| linux-riscv | — | 6.17.0-6.6.1 |
| linux-riscv-5.11 | — | — |
| linux-riscv-5.15 | — | 5.15.0-1095.99~20.04.1 |
| linux-riscv-5.19 | — | — |
| linux-riscv-5.8 | — | — |
| linux-riscv-6.14 | — | — |
| linux-riscv-6.5 | — | — |
| linux-riscv-6.8 | — | 6.8.0-106.106~22.04.1 |
| linux-starfive-5.19 | — | — |
| linux-starfive-6.2 | — | — |
| linux-starfive-6.5 | — | — |
| linux-xilinx | — | 6.8.0-1028.29 |
| linux-xilinx-zynqmp | — | 5.15.0-1064.68 |
References
Similar Threats
- Unknown CGA-23jx-hhcx-m389
- Unknown CGA-2qp7-6757-fmgc
- Unknown CGA-2rj5-jc55-r267
- Unknown CGA-3m96-cwq8-6xmx
- Unknown CGA-3qj9-973w-fh9g
Vulnerability Monitoring
Stay informed about vulnerabilities in your stack
BotEraser monitors your WordPress installation and notifies you when software you use appears in our vulnerability database.
Set Up Free Alerts →No credit card required · Results in minutes
ⓘ Data Notice: The information presented above has been compiled from publicly available internet sources. Boteraser aggregates this data solely for informational purposes and does not independently classify, evaluate, or endorse any findings about the vulnerabilities listed. The accuracy and completeness of this information is the sole responsibility of the original publishers. Boteraser and its operators accept no liability for any decisions made based on this data.
